Enamels and Enamelling equipment

Give colour, vibrancy or elegance to your creations with the many solutions we provide.

Products Enamels and Enamelling equipment

Assorted enamel colours and hardeners for decoration by CABE Srl

Resins and coloured epoxy enamels

Enamels for quality and high-impact enamelling

Hardeners for epoxy resins

Find more

Enamels

Our enamels are two-component epoxy-based resins.
To achieve hardening, it is necessary to mix the resin of the chosen colour with the most suitable hardener for the application to be performed

Colours

You can choose from 30 coating and 24 transparent colours. In addition, products such as glitter, mother-of-pearl, fluorescent or metallic colours are available for more artistic customisation.

Hardeners

The wide selection of hardeners guarantees professional quality work in every situation: you can decorate flat, curved, edged or unedged surfaces; with the right hardeners you can, for example, smooth enamel, achieve a flexible enamelling and much more.

Hardeners for epoxy resins

What kind of subjects do you need to decorate?

Do surfaces have an edge or not? Are they flat or convex?

Does the enamel have to be hard enough to be polished? Or, on the contrary, soft and flexible enough to be bent?

The physical specifications of enamels, both before and after enamelling, vary depending on the hardener used: you can choose the one that suits you from the hardeners described below.

Technical Specifications

Hardener	Main use	Dose per 100 g of enamel	Baking	Summary Description
177	Flat surfaces with edges	45 g	80°C for 90 minutes	Very fluid and self-leveling; makes the enmel shine.
180M	Flat surfaces without edges; lens effect	50 g	80°C for 90 minutes	Slightly denser; creates a domed effect without surface spillage.
184/1 184/3 184/5	Curved or inclined surfaces	Approx. 40 g	60°C for 3 hours	Different densities (minimum, intermediate, high) to suit the curvature; no dripping.
209M	Enamel to be polished; reintroduction into the oven	33 g	80°C for at least 2 hours	High hardness; heat-resistant; suitable for sanding and mechanical treatment.
850	Catalysis without heating	60 g	24 hours at ≥22°C	Catalyses at room temperature; gives flexibility to hardened enamel.